im still kind of new to server setup iv got my server working fine but the i dont no much of the settings yet
im trying to make the speed in the faster so i changed
cycle_start_speed
sp_speed_factor
i was thinking sp_speed_factor was going to make the speedo on the HUD go higher than 50 but it didn't so i just wanted to kno wich command does that
could someone give me an example of what there speed settings are
speed setup prob
The only thing that changes the HUD max speed is exceeding it, as far as I know.
There's also CYCLE_ACCEL and CYCLE_WALL_NEAR. If you just want faster, the multiplier you've mentioned does it. If you want more dynamic speeds, use acceleration. CYCLE_WALL_NEAR determines the distance from a wall at which a wall will apply acceleration to the cycle.
Anyway, you can't use the max speed on the HUD as any indicator because it defaults to 50, and then the HUD rescales when you pass over 50. So if the highest speed you've reached is 76, then the HUD will be scaled from 0-76, until/unless you go faster than 76. So you have to play with the settings and play the grid to find what you like.
There's also CYCLE_ACCEL and CYCLE_WALL_NEAR. If you just want faster, the multiplier you've mentioned does it. If you want more dynamic speeds, use acceleration. CYCLE_WALL_NEAR determines the distance from a wall at which a wall will apply acceleration to the cycle.
Anyway, you can't use the max speed on the HUD as any indicator because it defaults to 50, and then the HUD rescales when you pass over 50. So if the highest speed you've reached is 76, then the HUD will be scaled from 0-76, until/unless you go faster than 76. So you have to play with the settings and play the grid to find what you like.
Check out my YouTube channel: https://youtube.com/@davefancella?si=H--oCK3k_dQ1laDN
Be the devil's own, Lucifer's my name.
- Iron Maiden
Be the devil's own, Lucifer's my name.
- Iron Maiden