Error during install of Sty
Error during install of Sty
I'm trying to install sty, but I get an error message during the make install portion. I've followed these directions exactly http://wiki.armagetronad.net/index.php?title=Sty. I skipped the optional part.
Here is the error I get at the end after I do $ sudo make install. http://armagetron.pastebin.com/m6152aded
I've tried messing around with the prefix/install location, but it doesn't seem to matter. I also tried lp:~armagetronad-ct/armagetronad/0.2.8-armagetronad-sty as someone suggested (the wiki points at armagetronad-dev). Got the exact same results.
I'm running Ubuntu 9.10 on an old Mac Book Pro (2.16 Core Duo, 1GB RAM, X1600 Radeon 128 MB or 256 MB or something).
I realize that one of the first things on that page says we maintain, not support, sty, but I thought I would ask anway.
Any help would be appreciated.
Here is the error I get at the end after I do $ sudo make install. http://armagetron.pastebin.com/m6152aded
I've tried messing around with the prefix/install location, but it doesn't seem to matter. I also tried lp:~armagetronad-ct/armagetronad/0.2.8-armagetronad-sty as someone suggested (the wiki points at armagetronad-dev). Got the exact same results.
I'm running Ubuntu 9.10 on an old Mac Book Pro (2.16 Core Duo, 1GB RAM, X1600 Radeon 128 MB or 256 MB or something).
I realize that one of the first things on that page says we maintain, not support, sty, but I thought I would ask anway.
Any help would be appreciated.
Re: Error during install of Sty
Did you run ./bootstrap.sh and then configure your server?
You might find http://wiki.armagetronad.net/index.php? ... x_computer useful.
Hope you get it working! And Hi Boosh! Long time no see!
Try this:
bzr branch lp:~armagetronad-ct/armagetronad/0.2.8-armagetronad-sty+ct
cd to the location where you installed it
./bootstrap.sh
./configure --disable-glout --enable-automakedefaults --disable-sysinstall --disable-etc --disable-useradd --disable-initscripts --enable-armathentication
make
make install
Note: --enable-Armathentication is optional only if you want to have your server use authentication to work. If not, just delete what's in bold.
You might find http://wiki.armagetronad.net/index.php? ... x_computer useful.
Hope you get it working! And Hi Boosh! Long time no see!
Try this:
bzr branch lp:~armagetronad-ct/armagetronad/0.2.8-armagetronad-sty+ct
cd to the location where you installed it
./bootstrap.sh
./configure --disable-glout --enable-automakedefaults --disable-sysinstall --disable-etc --disable-useradd --disable-initscripts --enable-armathentication
make
make install
Note: --enable-Armathentication is optional only if you want to have your server use authentication to work. If not, just delete what's in bold.
Re: Error during install of Sty
Looks like make install is properly broken, I hope to find some time to look into it more deeply. Can't you run the server from the build directory? That's what I'd recommend for hack servers anyway, makes them easier to update.
Re: Error during install of Sty
I've give these both a try later this week when I get some time. Thanks for replies.
Re: Error during install of Sty
Ah, it could be that this is a problem inherited from the mainline. Could you try building and installing a server from the 0.2.8-armagetronad-work branch? I suspect your version of automake generates code that breaks our uninstall script generation magic.
Edit: To get to the bottom of this faster, could you post the full output of, please?
Edit: To get to the bottom of this faster, could you post the full output of
Code: Select all
make -k uninstall
Re: Error during install of Sty
School started up again and I got my priorities mixed up a little bit, but I'm trying to get this working again.
I did what you suggested and pasted it here: http://armagetron.pastebin.com/xvDGhVib
I included the error at the make install step as well as the make -k unistall part
This is the branch I used: bzr branch lp:~armagetronad-dev/armagetronad/0.2.8-armagetronad-work
Thanks for helping me out!
I did what you suggested and pasted it here: http://armagetron.pastebin.com/xvDGhVib
I included the error at the make install step as well as the make -k unistall part
This is the branch I used: bzr branch lp:~armagetronad-dev/armagetronad/0.2.8-armagetronad-work
Thanks for helping me out!
- compguygene
- Adjust Outside Corner Grinder
- Posts: 2346
- Joined: Thu Aug 21, 2008 12:09 pm
- Location: Cleveland, Ohio
- Contact:
Re: Error during install of Sty
Have you considered using this command instead
This comes from here
then you would do this command.
and then to update to the latest bugfix.
I have had nothing but success with this method. I have encountered problems following the method that you tried.
Of course, when you have done this, you will need to:
configure command if you want Armathentication installed.
configure command if you do not want install Armathentication.
make and make install
Code: Select all
bzr co http://bazaar.launchpad.net/~armagetronad-ct/armagetronad/0.2.8-armagetronad-sty+ct
then you would do this command.
Code: Select all
cd 0.2.8-armagetronad-sty+ct
Code: Select all
bzr up
Of course, when you have done this, you will need to:
Code: Select all
./bootstrap.sh
Code: Select all
./configure --disable-glout --enable-automakedefaults --disable-sysinstall --disable-etc --disable-useradd --disable-initscripts --enable-armathentication
Code: Select all
./configure --disable-glout --enable-automakedefaults --disable-sysinstall --disable-etc --disable-useradd --disable-initscripts
Code: Select all
make
Code: Select all
make install
Armagetron: It's a video game that people should just play and enjoy
https://bit.ly/2KBGYjvCheck out the simple site about TheServerPharm
https://bit.ly/2KBGYjvCheck out the simple site about TheServerPharm
Re: Error during install of Sty
Tried those steps exactly and I still get the same error. I think it must be specific to my computer in some way. Thanks for the suggestion though.
Re: Error during install of Sty
When building from bzr, you also need to have m4 installed. Just remembered that.
Re: Error during install of Sty
Code: Select all
mrngneom@jamers-laptop:~/bin$ sudo apt-get install m4
[sudo] password for mrngneom:
Reading package lists... Done
Building dependency tree
Reading state information... Done
m4 is already the newest version.
m4 set to manually installed.
The following packages were automatically installed and are no longer required:
linux-headers-2.6.31-14 linux-headers-2.6.31-14-generic
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 78 not upgraded.
Re: Error during install of Sty
Ah, right, the long break made me forget what the problem was. The problem is that the uninstall script creation relies on behavior of 'make uninstall', which seems to have changed in recent automake versions. To work around that, just pass '--disable-uninstall' to configure. The output you pasted tells me what 'make uninstall' is doing differently and should enable me to fix things.
Re: Error during install of Sty
Adding --disable-uninstall worked and it looks like everything installed correctly. If I could buy you a beer I would. Thanks!