Authentication works fine when connecting to the server via LAN (and TRUST_LAN 1).
But if I connect via WAN and try to authenticate, i get the following error, which doesn't really make sense to me:
As mentioned before, TRUST_LAN is set. Binding the public IP isn't possible because of the router sitting in between... Am I missing something? Any ideas?Login failed, reason: Server address mismatch, 1.2.3.4:5678 (sent by client) != *.*.*.*:* (our address). Pharming suspected. If you are connecting from the LAN and get this error, either set "TRUST_LAN" on the server (only if your LAN can be fully trusted, of course) or use "SERVER_IP" to make the local IP known to the server.
Thanks.