I have built the 0.3_alpha server in linux ubuntu, with armathentication, but the config_rotation is not happy about it. When used this happens:
[0] Required access level of command CYCLE_SPEED is "Administrator", you only have "config_accesslevel_255".
[0] Required access level of command CYCLE_RUBBER_TIME is "Administrator", you only have "config_accesslevel_255".
[0] Required access level of command WALLS_STAY_UP_DELAY is "Administrator", you only have "config_accesslevel_255".
[0] Required access level of command WALLS_LENGTH is "Administrator", you only have "config_accesslevel_255".
[0] Required access level of command DOUBLEBIND_TIME is "Administrator", you only have "config_accesslevel_255".
[0] Required access level of command SIZE_FACTOR is "Owner", you only have "config_accesslevel_255".
[0] Required access level of command ROUND_CONSOLE_MESSAGE is "Administrator", you only have "config_accesslevel_255".
A little help?
config_rotation not working in 0.3_alpha server build
- -JacKZenTH-
- On Lightcycle Grid
- Posts: 36
- Joined: Sat Apr 25, 2009 2:11 pm
- Location: England
-
- Adjust Outside Corner Grinder
- Posts: 2003
- Joined: Tue Nov 07, 2006 6:02 pm
- Location: paris
- Contact:
Re: config_rotation not working in 0.3_alpha server build
Hmm, are you setting yourself at access level -1 somehow? How is your config file included?