config_rotation not working in 0.3_alpha server build

Post here if you need help setting up your server, etc.
Post Reply
User avatar
-JacKZenTH-
On Lightcycle Grid
Posts: 36
Joined: Sat Apr 25, 2009 2:11 pm
Location: England

config_rotation not working in 0.3_alpha server build

Post by -JacKZenTH- »

I have built the 0.3_alpha server in linux ubuntu, with armathentication, but the config_rotation is not happy about it. When used this happens:

[0] Required access level of command CYCLE_SPEED is "Administrator", you only have "config_accesslevel_255".
[0] Required access level of command CYCLE_RUBBER_TIME is "Administrator", you only have "config_accesslevel_255".
[0] Required access level of command WALLS_STAY_UP_DELAY is "Administrator", you only have "config_accesslevel_255".
[0] Required access level of command WALLS_LENGTH is "Administrator", you only have "config_accesslevel_255".
[0] Required access level of command DOUBLEBIND_TIME is "Administrator", you only have "config_accesslevel_255".
[0] Required access level of command SIZE_FACTOR is "Owner", you only have "config_accesslevel_255".
[0] Required access level of command ROUND_CONSOLE_MESSAGE is "Administrator", you only have "config_accesslevel_255".


A little help?
epsy
Adjust Outside Corner Grinder
Posts: 2003
Joined: Tue Nov 07, 2006 6:02 pm
Location: paris
Contact:

Re: config_rotation not working in 0.3_alpha server build

Post by epsy »

Hmm, are you setting yourself at access level -1 somehow? How is your config file included?
Post Reply