Armagetron Forums

I’m happy to announce a new addition to the Breakfast family, “Swampland Teams”. The server has gong through some growing pains in its way to becoming available for play, but I believe it's up to par now. The server is an AMD 64 3000+ box with 512mb ram, 7200 rpm hd and a shared broadband connection...

I was wondering the same thing, so I contacted Kelk. Here's his reply: no i think im going to push it back 2 weeks because of a death in the familly then i am out of town the next week so this will give a little more time for people if you could post that on the swampland banner that would be great ...

I'm bringing a new ArmagetronAD 2.7.0 server online that's running on an AMD 64 machine that has Fedora 64 as it's OS. I installed the dedicated server binary's and it's working fine. I'd like to know if there's something that I can drop into the init.d folder so the service will start @ boot. I'd a...

I think adding SERVER_PORT to the cfg file did the trick. I tested it from a couple machines and it's showing up on the Master server. I added it to two files :oops: just to make sure. I added that entry to settings_dedicated.cfg and settings.cfg. I'll try removing it from one of the files later and...

I didn't do the SERVER_PORT change. What
s the name of the config file that has that entry? Or does that line need to be manually added?

Yep, there's two machines sitting behind a Linksys router. One is swampland, which is up and running and in the list. A second machine, running Red Hat is loaded with ArmagetronAD_Dedicated 2.7.0 and it's also behind the same router. Both machines are set with static addresses and have the router se...

I'm not sure what I'm doing wrong :( I have the master.srv replaced with a backup, so it's back to default again. I have IPtables turned off on the Linux machine and I have the range 4543 - 4550 allowed pointed to the internal address of the second machine. The server is started and still doesn't ap...

I searched around and couldn't get my answer.. so I'm reaching out for help :) I have another machine that I wan't to bring online as an experimental machine. I say experimental because I don't know how good/bad it's going to be for the players yet. I have Swampland running on the default port to th...

Thanks for the heads-up. There's people playing on it now, so I guess it's working ok. I'll reboot the server during some down time and make sure it's back up to par.

Awesome!
(oops, double post)

Content! I see content now!!

Swampland went down last night (around 3am est) because we had a power outage in my area. I didn't check to see if the server was up before I left for work, but I brought it up when I got home. :P (I assume it was down since the outage. It might have came back up because the BIOS is set to do that. ...

That's right folks, there's a tournament being held on Swampland. This was put together by some people other than me, so I don't know all of the specifics of how it's going to be run yet. You can go here: (http://www.geocities.com/kelkiron/ ) to see the players and you can email kelkiron@yahoo.com t...

Well I did some resetting tonight because my ISP (Comcast cable) boosted our bandwidth up from 2.4 megabits per second to 4.6. I had to reset my cable modem to get the newer speed. Most users on tonight had pings under 100, so it made an improvement. I also rebooted the server and the memory usage d...